激光電源是針對本公司激光管研制而成,產品具有性能穩定、抗干擾能力強、體積小巧、耐老化的特點。
型號 Model | 輸出電壓 Voltage Output(kV) | 最大電流 Max. Current(mA) | 尺寸 Size LxWxH(mm) | 殼體顏色 Color | 配套管型 Laser Tube | 質保期 Warranty (M) |
YL-2 | 30 | 25 | 220x150x100 | 黑色Black | A0s, A1s, T0, T2, H1 | 12 |
高壓線 冷卻風扇
輸入說明
Enter Instructions
1 2 3 4 5 6
TH TL WP G IN 5V
TH | 輸入信號 Input Signal | TTL高電平(≥3V)時出光,低電平(≤0.3V)時不出光 Laser output in TTL high level(≥ 3V), Laser off in low level(≤ 0.3V) |
TL | 輸入信號 Input Signal | TTL高電平(≥3V)時不出光,低電平(≤0.3V)時出光 Laser output in TTL high level(≥ 3V), Laser off in low level(≤ 0.3V) |
WP | 保護接口 Protection Interface | 不用時短接 Short-circuit when not in use |
G | 信號地 Signal Ground | 此腳必須和激光機的機殼、控制板的接地良好相連 This pin must be connected with Ground of the machine shell and control board. |
IN | 輸入信號 Input Signal | 激光功率控制端,可用0-5V模擬信號控制,或用5V為幅值的PWM信號控制,或用手動電位器控制 Laser power control terminal, can be controlled by 0-5V analog signal, or controlled by 5V PWM signal of amplitude, or controlled by manual potentiometer (4.7KΩ1/2W) |
5V | 輸出電源 Output Power Supply | 5V輸入,其最大輸出電流為50mA 5V input, its maximum output current is 50mA |